Payment & Shipping Terms:
|Product:||Hydraulic Drive Motor||Model:||CBT-E3|
|Power:||Direct Drive - Power Transmission||Material:||Aluminum, Cast Iron|
low speed gear motor,
high speed gear motor
Hydraulic Gear Motor/ Pump, 5/8" Shaft SAE A 2 Bolt, Same as CB2A-F11SA
Gear Pump, SAE A 2-bolt Mounting / 4-bolt Mounting. 04/ 06/ 08/ 10/ 12/ 14/ 16/ 20/ 25 ml displacement. 6 GPM (Gallons/minute) at 2000 RPM.
This pump/ motor consists of a gear pair supported by two aluminum bearing blocks, a housing, front cover and rear cover. The axis clearance can be automatically compensated by the bearing blocks. This pump/ motor features high mechanical and volumetric efficiency, low noise, high reliability as well as a high power to weight ratio.
Hanjiu Gear Motor/ Pumps widely used on Agricultural tractors, Harvesters, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.
Used on tractor of Belarus, Case, David Brown, Deutz, Fendt, Fiat, Ford, , Lamborgini, Massey Ferguson, New Holland, Same, etc.
This CBT type is our best seller to global market, today i introduce motor CBT series to you:
CBT series gear motor/ pumps are external motors with axial compensation and radial balancing. They are widely applied in hydraulic system of Agricultural & Tractor and Engineering Trucks.
CBT series gear motor/ pumps can be provided with various kinds of mounting glanges, shaft ends and connection styles of inlet and outlet. Please refer to the table below. This series of motor/ pump can be made as side-in and rear-out, rear-in and side-out. CBT motor/ pump can also be combined as a relief pump with safety valve, or as a constant flow pump with constant flow valve.
|4||Module of Gear: m=3|
|5||Norminal Displacement (ml/r): 04, 06, 08, 10, 12, 14, 16, 18, 20, 25|
F: flange connection (90°, 4-M8, distribution circleφ38)
F3: flange connection(90°, 4-M6, distribution circleφ40) ,
F5: flange connection (45°, 4-M8, distribution circleφ38) ,
If displacement is 20ml/r, the distrbution circle is φ50)
S: metric thread connection (only for 2#front cover)
None: four-teeth rectangle splined shaft key (4D-15f9x11.4b12x4f9)
E1: straight keyed shaft (Φ 16, C5x28)
B: flat shaft (Φ 15, flat 8)
B1: flat shaft (Φ 18, flat 8)
S3: straight keyed cone (1:10Z4, key B6x14)
|8||Rotation (looking from the shaft end): L: Left R: Right|
Mounting flange type (front cover code):
1: rhombic (spigot Φ82.55, 2-Φ11,distance 106);
2: four-hole quadratic (spigot Φ38, 4-Φ9,distance 70x100, thick 13);
4: two-hole random (spigot Φ38,2-Φ11, distance 60x60);
11: four-hole quadratic (spigot Φ38,4-Φ9,distance 70x100, thick 18)
(special order acceptance)
Please do not hesitate to contact us for further information, inquiries or orders.
Thank you for choosing 'Hanjiu' Hydraulics.
Contact Person: Alyssa Lee