|
Product Details:
Payment & Shipping Terms:
|
| Product: | High Torque Hydraulic Motor | Model No.: | BMT315-4TDB |
|---|---|---|---|
| Application: | Drilling Machine | Displacement: | 315 ML/R |
| Flow: | 150 L/MIN | Output: | 40 KW |
| Max Torque: | 1346.3 N*m | Max Speed: | 460 RPM |
| Shaft: | Tappered Shaft | Mounting: | 4 - 14 Mm |
| High Light: | hydraulic rotation motor,hydraulic pump motor |
||
Low RPM Hydraulic Motor Mining Plasting Rotary Drilling Rig Drive Motors
Quick details:
This BMT315-4TDBHydraulic BMT is a motor replace with OMT.
| OMT 315 C | Displacement | flange | Shaft | Ports | Drain | |
| BMT 315 C | 315 cc | 4-Ø14 Square-flangeØ160, pilotØ125×9 | Tappered shaft , parallel key B12×8×28 | G3/4 Manifold Mount,4-M10 | G1/4 |
BMT Introduction:
This Low Speed High Torque hydraulic motor BMT is a big motor compare with other series like BMM(OMM,MM), BMP(OMP, MP), BMR(OMR, MR), BMH(OMH, MH), it's displacement start from 160 ml/r to 800 ml/r, speed from 154 rpm to 780 ml/r, torque from 470 N.m to 1665 N.m, max output from 22.2 kw to 40 kw, max flow from 100 L/min to 150 L/min.Below is the detail specifications of this BMT low speed high torque hydraulic motors.
Applications:
| Flange | ||
| 4 | 4-Ø14 Square-flangeØ160,pilotØ125×9 | BMT |
| K6 | 4-Ø14.5Square-flangeØ162,pilotØ127×9 | |
| W | 4-Ø18 Wheel-flangeØ200,pilotØ160×7 | |
| D | 4-Ø14 Circle-flange Ø160,pilot Ø125×8 | BMTS |
| E | 4-Ø14.5 Square-flange Ø162, pilot Ø127×10 | |
| Output Shaft | ||
| M | Shaft Ø40,parallel key 12×8×70 | BMT |
| G | Shaft Ø38.1,parallel key 9.52×9.52×57.15 | |
| F | Shaft Ø38.1,splined tooth 17-DP12/24 | |
| FD | Shaft Ø38.1,splined tooth 17-DP12/24 | |
| T | Cone-shaft 1:10 Ø45,parallel key B12×8×28 | |
| T1 | Cone-shaft 1:8 Ø45,parallel key 11.13×11.13×31.75 | |
| SL | shaft Ø34.85,Splined key,Splined key 6-34.85×28.14×8.64 | |
| G1 | shaftØ31.75,parallel key 7.96×7.96×40 | |
| F1 | Shaft Ø31.75,splined tooth 14-DP12/24 | |
| Omit | Short shaft 16-DP12/24 | BMTS |
| Port and Drain Port | ||
| D | G3/4 Manifold Mount,4-M10 , G1/4 | |
| M | M27×2 Manifold Mount,4-M10, M14×1.5 | |
| S | 1-1/16-12UN O-ring, 9/16-18UNF | |
| S1 | 1-1/16-12UN O-ring, 7/16-20UNF | |
| G | G3/4,G1/4 | |
| M3 | M27×2,M14×1.5 | |
| Main Specifications: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
* Continuous pressure :Max. value of operating motor continuously. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Substitute Reference substance
MOTOR CROSS REFERENCE TABLE |
||||||||
| HANJIU HYDRAULIC |
M+S HYDRAULIC |
EATON CHAR LYNN |
ROSS TRW |
WHITE CROSS |
PARKER | SAM BREVINI |
BOSCH RECROTH |
|
| BMM | MM MLHK | J SERIES | OMM | BGM | MGX | |||
| BMP/BM1 | MP HP | H SERIES | OMP DH | MF MG | WP RS | TC TE TB | BG | MGP GXP |
| BMR/BM2 | MR HR MLHRW,RW | S,T SERIES W SERIES | OMR DS OMEW | MB | WR RE | TF | BR | MGR GMR |
| BMH/BM4 | MH MLHH HW HWF | OMH | ME | RE | TG | |||
| BMS/BM5 | MS MSY MLHS | 2000 SERIES | OMS | ME | RE | TG | HPR | MGS GMS |
| BMT/BM6 | MT MLHT MTM | 6000 SERIES | OMT TMT | MJ | HT | MGT,GMT | ||
| BMV | MV MLHV | 10000 SERIES | OMV |
MGV GMV |
||||
Please do not hesitate to contact us for further information, inquiries or orders.
Thank you for choosing 'Hanjiu' Hydraulics.
Tel: 86-311-68123061
Fax: 86-010-80115555-568844
